rfo types flow rate monitoring

Specifications
Wetted Materials
Body	Brass, Stainless Steel or Polypropylene (Hydrolytically Stable, Glass Reinforced)
Rotor Pin	Ceramic
Rotor	PPS Composite, Black*
Lens	Polysulfone
O-Ring	Viton® (Alloy Bodies); Buna N (Polypropylene Body)
Low Flow Adaptor	Glass Reinforced Polypropylene
Operating Pressure, Maximum
Brass or Stainless Steel Body	13.8 bar (200 PSIG), Maximum
Polypropylene Body	6.9 bar (100 PSIG) at 21°C (70°F), 2.8 bar (40 PSI) Max. @ 82°C (180°F)
Operating Temperature
Brass or Stainless Steel Body	-29°C to 100°C (-20°F to 212°F)
Polypropylene Body	-29°C to 82°C (-20°F to 180°F)
Other Specifications
Electronics	65°C (150°F) Ambient
Viscosity, Maximum	200 SSU
Input Power	4.5 VDC to 24 VDC
Output Signal	4.5 VDC to 24 VDC Pulse. Pulse Rate Dependent On Flow Rate, Port Size and Range
Current Consumption	8 mA, No Load
Current Source Output, Max	70 mA
Frequency Output Range	25 Hz (Low Flow) to 225 Hz (High Flow)
Accuracy	See Table. Page K-6
Electrical Termination	22 AWG PVC-Jacketed, 24” Cable. Color Coded: Red = +VDC, Black = Ground, White = Signal Output

*Standard on Stainless Steel bodies

Pret: Vă rugăm să ne contactaţi

Stoc disponibil: Intreaba